Gustafson RV LED Pendant Light - Ceiling Mount - Satin Nickel - Frost Module

Video Transcript for Gustafson Lighting RV Lighting 277-000462 Review

Today we're going to take a look at the Gustafson RV LED pendant light. This is going to be a ceiling mount. And it comes with a satin nickel finish and a frost module. Now this is going to be a great addition to your RV to give you some extra lighting, or update your existing lighting. It does not come with the glass shade, but we do have options available here etrailer.com to fit that. Basically, the way that you install that shade, it's just unscrew that module at the end, and then that will reveal the LEDs on the end there.

Going to have six LEDs in total. Also, have two rubber grommets, or rubber washers that are going to help keep that in place. So put on our shade, for example, just so you can get an idea of what it looks like.You want to make sure that you have a one of the rubber washers on either side of that glass and then you're just going to thread the module back down in there to hold it in place. And then it should look something like that once you have that shade installed. The nice thing about the frost or frosted module, is that's going to kind of diffuse that light, give you a little bit of a softer glow, rather than the direct clear module.

So that'll be a good option if that's what you're looking forward to, have a softer lighting experience. Our lamp housing is going to be made of a durable steel construction with that nice modern, sleek looking satin nickel finish. At the base, we'll have two wires to connect. We'll have our white wire for ground, and the black wire for power. And then we'll also have two mounting holes.Now the hardware to get that installed is not included with this.

You will have to pick that up on your own. We'll hook this up to power here so you can get an idea of how bright that light is whenever it's turned on. So our black wire will be power, white will be ground. Flip that on. And as you can see, that's going to be a nice, bright light, with that sort of diffused lighting, so it's not to be too harsh, even if it's hanging kind of low there.

Now, as far as the overall dimensions with this light, from the base to the tip of that module, it's going to be about 13-3/8 of an inch long. The base is going to be about 3-1/2 inches wide. And then the mounting holes, the distance between those two, is going to be about 2-3/8 of an inch. The mounting hole diameter will be 3/16.Now with the shade attached, it will be a little bit longer, of course, and that's going to be more like 14-3/4 of an inch from the base to the edge of that glass. And that's going to do it for our look at the Gustafson RV LED pendant light.